ALLERGIES? SINUS PROBLEMS? HAVE A NEW BORN? UNEXPLAINED CONGESTION?

Clean Your Ducts, Breath Better.

When’s the last time your ducts were cleaned? Your central air and heat system circulates millions of dust mites and molds through your home every time your blower is activated.

The National Air Duct Cleaners Association (NADCA) estimates the average six-room house collects 40 lbs. of dirt, dust and allergens in its air ducts each year. The EPA estimates indoor air may be two to five times more polluted than the air outside. Waiting to clean your ducts may put you and your family at risk!

Get a FREE Estimate Now!

Step-by-Step Guide on How We Clean Your Ducts

Step 1.

Before picture of an average. home’s dirty ducts.

Step 2.

We remove all the vents and cut cardboard to cover the air hole where the air comes out.

Step 3.

We insert the cardboard into air box over the air hole to cause an air vacuum once our machine is on.

Step 4.

We use our 5000 cfm vacuum to suck back all the debris that’s in the air ducts the we stir up while cleaning.

Step 5.

We use our 150 psi air compressor to power air whips with 50′ of rod that we use to scrub the inside ducts clean.

Step 6.

We also use a 20′ long cable wire brush to scrub the inside ducts clean, while the 5000 cfm machine is sucking all the debris back to the machine.

Step 7.

This is what the wire brush looks like inside the ducts. You can see it scrubbing the duct walls clean. The brush comes in all sizes.

Step 8.

This is the 12″ duct that the vacuum machine uses to connect itself to the duct work. The debris travels through this and to the machine filters.

Step 9.

We then remove the blower motor in the furnace, disassemble it, clean / disinfect it, and then reinstall it. This blows the air and is just as dirty as the ducts.

Step 10.

We then remove the AC freon, remove the coil, clean and disinfect it, then reinstall it. The air always goes through this and the coil fins act like a filter. It is very important to clean this as well.

Step 11.